Abziehhülsen AH2236 170x200x105mm FAG
Innendurchmesser: 170 mm
Außendurchmesser: 200 mm
Breite: 105 mm
Gewicht: 3.700000 kg
Filter By
Categories
Categories
Price
Price
€4.00 - €4,108.00
Brand
Brand
Inner dimension
Inner dimension
Outer dimension
Outer dimension
Width
Width
Sleeves are used to attach or secure bearings, bushings, or other rotating or moving parts on shafts. They are commonly used in mechanical engineering, automotive technology, industry, and other applications to enable the mounting of rotating parts. In our shop you will find a wide range of clamping sleeves and pull-off sleeves.
There are 1901 products.
Abziehhülsen AH2236 170x200x105mm FAG
Innendurchmesser: 170 mm
Außendurchmesser: 200 mm
Breite: 105 mm
Gewicht: 3.700000 kg
Abziehhülsen AH2236 G 170x180x105mm SKF
Innendurchmesser: 170 mm
Außendurchmesser: 180 mm
Breite: 105 mm
Gewicht: 3.420000 kg
Abziehhülsen AH2310 45x55x50mm ZEN
Innendurchmesser: 45mm
Außendurchmesser: 55mm
Breite: 50mm
Gewicht: 0.215000kg
Abziehhülsen AH2340 190x200x170mm ZEN
Innendurchmesser: 190mm
Außendurchmesser: 200mm
Breite: 170mm
Gewicht: 7.600000kg
Abziehhülsen AH2340 190x220x170mm FAG
Innendurchmesser: 190mm
Außendurchmesser: 220mm
Breite: 170mm
Gewicht: 7.857000kg
Abziehhülsen AH2348-H 220x260x189mm FAG
Innendurchmesser: 220mm
Außendurchmesser: 260mm
Breite: 189mm
Gewicht: 15.400000kg
Abziehhülsen AH24026 125x130x83mm SKF
Innendurchmesser: 125mm
Außendurchmesser: 130mm
Breite: 83mm
Gewicht: 0.880000kg
Abziehhülsen AH24026 125x130x83mm ZEN
Innendurchmesser: 125 mm
Außendurchmesser: 130 mm
Breite: 83 mm
Gewicht: 0.880000 kg
Abziehhülsen AH24026 125x135x83mm FAG
Innendurchmesser: 125 mm
Außendurchmesser: 135 mm
Breite: 83 mm
Gewicht: 0.875000 kg
Abziehhülsen AH24028 135x140x83mm ZEN
Innendurchmesser: 135 mm
Außendurchmesser: 140 mm
Breite: 83 mm
Gewicht: 0.950000 kg
Abziehhülsen AH24034 160x170x106mm SKF
Innendurchmesser: 160 mm
Außendurchmesser: 170 mm
Breite: 106 mm
Gewicht: 2.700000 kg
Abziehhülsen AH24044 200x230x138mm ZEN
Innendurchmesser: 200 mm
Außendurchmesser: 230 mm
Breite: 138 mm
Gewicht: 8.250000 kg
Clamping sleeves are special sleeves used to attach bearings or other components to shafts with a cylindrical or conical seat. With the help of these sleeves, the bearing can be mounted at any point on the shaft. Clamping sleeves come with a shaft nut and a locking plate. By tightening the shaft nut, the sleeve is "pulled" between the shaft and the inner ring of the bearing and must be secured against loosening with the help of the locking plate.
For larger diameters (>= 140 mm), hydraulic clamping sleeves are also available, which have a pressure oil connection. From a diameter >= 200 mm, the hydraulic version is standard. The use of the hydraulic variant reduces the required assembly forces, making installation of the bearing much easier.
Pull-off sleeves are used when the bearings need to be mounted on the shaft from the outside. In this case, an axial support, such as a shaft shoulder, is required, as the pull-off sleeve is installed with externally applied assembly forces. During installation with a pull-off sleeve, the sleeve is pressed into the bearing bore. Subsequently, the pull-off sleeve is secured on the shaft with a shaft nut or a locking plate. Due to the friction in the mating surfaces between the bearing, sleeve, and shaft, especially with larger bearings, high assembly forces are required to press the pull-off sleeve into the bearing bore. Therefore, pull-off sleeves with pressure oil connection should be used for bore diameters >= 140mm. Please note that the corresponding securing elements (shaft nuts, locking plates, etc.) are not included with pull-off sleeves and must be ordered separately.